 |
 |
Rough Wear 27752 Type A-2 "Combat Clone" Flight Jacket
Price: $900.00 (used condition) — note shipping costs below
Fit: this jacket has comfortable fit in the correct size
Leather: veg-tanned russet Shinki horsehide
Lining: pale brick cotton
Knits: mid-brown wool
Snaps: vintage United-Carr Anzo
Thread: light brown cotton
Zipper: reproduction M-41 Crown with vintage Crown slider and bottom stopper
Size: 46

This jacket was made four years ago, and it shows how beautiful some batches or hides from the famed Shinki tannery in Japan will look after regular
wear to a jacket. This is our standard russet, and after a lot of regular use, the wear and wrinkles, along with natural grain, have really
pushed this jacket into the realm of looking like a well used original.

Most of the Rough Wear W535-AC-27752 original were made with russet-finished leather, though some were certainly done in seal brown, too. Both are
accurate. Originals were also made by humans, with a very human touch, and we emulate that on special models of our jackets, which we call
the "Combat Clone" series. There are two typical components. First, sewing with a human touch of imperfection, and second, aging the leather. With this
jacket, we didn't age the leather, but you can see a human touch to how the jacket is constructed.

The jacket has a Crown zipper with straight teeth. There were a very small number of original 27752 jackets made using these zippers, and we owned one recently. That
jacket can be seen here. The jacket that we made has a vintage
Crown slider and bottom stopper, and repruduction cotton tape with nickel teeth. The jacket has a new set of knits installed, with our new knit
maker. The knits originally used in 2022 were not as good, and had lost some tension. These knits are so much better.

The pocket snaps are vintage United-Carr Azno units, and one can see a little green verdigris developing on the edges of the male half. This is
exactly what one sees on originals through age and wear.

A jacket like this will get comments from those who know what A-2 jackets are. As in, "Please wear that jacket carefully, as it's a WWII original."
This is a common situation with "Combat Clone" Good Wear jackets. This jacket was owned by one customer.

The jacket would ideally fit someone in the range of 5'10" to 6'1", with a chest of 41" to 43", and a weight of about 180-205 pounds. The jacket is shown
with a wearer who is 6 feet tall, 175 pounds with a 41.5" chest.

|
« Return |


















































Jacket dimensions:

| Front along zipper |
24.5" |
| Front chest under arms |
24.5" |
| Back width under arms |
24.5" |
| Back height |
25.25" |
| Shoulder width |
19.25" |
| Sleeves, from shoulder to end of cuff |
25.25" |

Rough Wear 27752 Type A-2 "Combat Clone" Flight Jacket
Price: $900.00 (used condition) — note shipping costs below
Fit: this jacket has comfortable fit in the correct size
Leather: veg-tanned russet Shinki horsehide
Lining: pale brick cotton
Knits: mid-brown wool
Snaps: vintage United-Carr Anzo
Thread: light brown cotton
Zipper: reproduction M-41 Crown with vintage Crown slider and bottom stopper
Size: 46

Payment

Payment can be made either by credit card, check, or using PayPal.com, with our
moniker of info@goodwearleather.com. For credit cards, please email your intent to purchase the jacket, and we will email
a SecureNet form to fill out with your credit card information. Shipping costs in addition are $45.00 for customers within
the U.S.A, and $100.00 for customers outside of the U.S.A., using FedEx International trackable shipping.
|
« Return |

|